Framing a Shed: Step-by-Step Wall Construction Guide
Building a shed requires careful planning and execution, especially when it comes to framing the walls. This comprehensive guide walks you through the process of constructing wall frames for your backyard shed project.
The construction begins with completing the roll work, which includes pin rolls and four main sections. While one person is working on the frame, another (Austin) is adding noggins (blocking between studs) as the structure comes together.
The project is being tackled in stages, with the back wall sections being constructed first. These consist of multiple 3.5-meter sections that will later be stood up on the concrete slab. The front sections, which will include openings for a window and door, are scheduled for the following day.
When building a shed with multiple wall sections, it's often efficient to build one section and then replicate it. As demonstrated in this project, after completing the first small back frame wall, the builder uses a half-length rear piece to speed up the construction of additional sections.
Most of the wood has been pre-cut, which significantly accelerates the building process. With this approach, three of the walls can be completed relatively quickly, leaving only the front sections with door and window openings for later.
The shed design features a sloped pent roof, as evidenced by the two bottom side pieces which show the angle. For those new to construction, you might notice that some pieces appear shorter than others. This is intentional – these shorter pieces will be topped with a top plate when the walls are stood up, bringing the corner to the proper height.
When building a shed with a sloped roof, it's important to ensure that the front walls match the height of the reference wall. This final adjustment will be made when all the wall sections are stood up and secured in their final positions.
By breaking down shed construction into manageable sections and building them flat on the ground before standing them up, even complex projects become much more approachable for DIY enthusiasts.
